Author |
Topic Search Topic Options
|
MikeEnRegalia
Special Collaborator
Honorary Collaborator
Joined: April 22 2005
Location: Sweden
Status: Offline
Points: 21121
|
Posted: October 11 2006 at 10:37 |
Heavyfreight wrote:
Also remember; as soon as you start talking about a "warm sound" you are talking about a deviation from the original sound. In this case less high frequency and "soft clipping" which is a rolling off of the loudest parts of the signal peaks (simply because the vinyl cannot have a peak or trough that deep, the magnetic tape is reaching saturation (all particles magnetised so none left to carry more signal) or if using a tube/valve amplifier the maximum signal for the cathode area (i.e. no more electrons available) being reached). |
exactly. It's true that for most people tube amps sound "warmer", but in fact it's all distortion. Of course being a (metal) guitarist I'm the first to admit that distortion can sound really nice and tubes create much better (read: harmonic) distortion than transistors, but the fact remains that the warmth is added by the amp - it is not like the tube amp reproduces the warmth of the original recording while the solid state amp destroys it and replaces it with "harshness". The original recording sounds harsh, that's the truth.
|
|
|
Neil
Forum Senior Member
Joined: October 04 2006
Location: United Kingdom
Status: Offline
Points: 1497
|
Posted: October 11 2006 at 10:38 |
oliverstoned wrote:
Real hifi is way beyond everything in studio! |
How do you think that the audio gets from the instruments to your precious vinyl then?
Clue: it's done in a STUDIO!
|
When people get lost in thought it's often because it's unfamiliar territory.
|
|
mystic fred
Special Collaborator
Honorary Collaborator
Joined: March 13 2006
Location: Londinium
Status: Offline
Points: 4252
|
Posted: October 11 2006 at 15:14 |
i'm pleased to see my old thread has been revived for discussion, and that you have a new sparring partner, Olivier!!(and Mike!)
Edited by mystic fred - October 11 2006 at 15:15
|
Prog Archives Tour Van
|
|
MikeEnRegalia
Special Collaborator
Honorary Collaborator
Joined: April 22 2005
Location: Sweden
Status: Offline
Points: 21121
|
Posted: October 12 2006 at 03:22 |
Honestly, I'm getting tired of the same discussion over and over again. Fact is that there is one huge problem that subjectivist have in their reasoning: Most audiophiles aren't able to tell sources apart (vinyl/CD) in properly conducted listening tests, but still claim that there is an "obvious" difference in quality. Doesn't make much sense to continue discussing the difference between vinyl and CD under these circumstances, does it?
|
|
|
oliverstoned
Special Collaborator
Honorary Collaborator
Joined: March 26 2004
Location: France
Status: Offline
Points: 6308
|
Posted: October 12 2006 at 04:20 |
"Most audiophiles aren't able to tell sources apart (vinyl/CD) in properly conducted listening tests, but still claim that there is an "obvious" difference in quality."
That what your stupid article written by jealous says.
|
|
oliverstoned
Special Collaborator
Honorary Collaborator
Joined: March 26 2004
Location: France
Status: Offline
Points: 6308
|
Posted: October 12 2006 at 04:25 |
Heavyfreight wrote:
oliverstoned wrote:
Real hifi is way beyond everything in studio! |
How do you think that the audio gets from the instruments to your precious vinyl then?
Clue: it's done in a STUDIO! |
I was talking about your playback experience in studio...
Through solidstate amp, using poor cables ("Monster cables" at best), etc...
There are some good stuffs in studio as well (good monitor speakers, power filtering devices such as "The black box").
I own some (old)studio sources such as my tapedecks Naka1000 and Studer A710.
For example, my digital setup (Sonic frontiers + Goldmund + Nordost cable) is beyond what they use for radio broadcast (Studer CD decks).
Edited by oliverstoned - October 12 2006 at 04:29
|
|
oliverstoned
Special Collaborator
Honorary Collaborator
Joined: March 26 2004
Location: France
Status: Offline
Points: 6308
|
Posted: October 12 2006 at 04:28 |
BTW, "Rega planar 3" were used for Radio broacast before "the whole numeric" era!
Edited by oliverstoned - October 12 2006 at 04:28
|
|
MikeEnRegalia
Special Collaborator
Honorary Collaborator
Joined: April 22 2005
Location: Sweden
Status: Offline
Points: 21121
|
Posted: October 12 2006 at 04:41 |
oliverstoned wrote:
"Most audiophiles aren't able to tell sources apart (vinyl/CD) in properly conducted listening tests, but still claim that there is an "obvious" difference in quality."
That what your stupid article written by jealous says.
|
whatever! BTW: - The article was written by a respected audiophile, and the wikipedia page is very objective - it explains both motives of objectivists and subjectivists, and doesn't draw any conclusions.
- You clearly didn't read the wikipedia page, as it points out that there are many audiophiles who prefer CD over vinyl. Those who continue to cling to vinyl as the ultimate medium are called "subjectivists", and that really describes them well. They only accept their own opinion, and will not listen to objective reasoning.
- No objectivist is jealous of your hi-fi system. Why should they be - they're convinced that their own system sounds good. In fact they're rather amused about your system (power line filters, voodoo cables etc) than jealous.
|
|
|
MikeEnRegalia
Special Collaborator
Honorary Collaborator
Joined: April 22 2005
Location: Sweden
Status: Offline
Points: 21121
|
Posted: October 12 2006 at 04:41 |
oliverstoned wrote:
BTW, "Rega planar 3" were used for Radio broacast before "the whole numeric" era!
|
So why did they stop using them?
|
|
|
Neil
Forum Senior Member
Joined: October 04 2006
Location: United Kingdom
Status: Offline
Points: 1497
|
Posted: October 12 2006 at 05:05 |
oliverstoned wrote:
BTW, "Rega planar 3" were used for Radio broacast before "the whole numeric" era!
|
By very few because they are so delicate.
Most broadcasters (including the BBC) opted for EMT decks which were as tough as old nails. EMT decks had an excellent servo mechanism using a laser etched tacho disc so their speed variation was miniscule. The BBC tended to use Ortofon cartridges. Nowadays when vinyl is only really used for dance mixing they tend to be Technics SL1200 decks and Stanton cartridges.
|
When people get lost in thought it's often because it's unfamiliar territory.
|
|
mystic fred
Special Collaborator
Honorary Collaborator
Joined: March 13 2006
Location: Londinium
Status: Offline
Points: 4252
|
Posted: October 12 2006 at 05:06 |
In answer to Mike's question above, i guess broadcasting institutions are swayed by prevailing technological trends, and a corporate decison to effect changes result in a "clean sweep", which in the case of a broadcasting company would involve a complete change of all their existing equipment. there may be some who still use analogue/turntable technology but in the main they use cd libraries - i often see many lp's in boot/used record sales that are marked "ex-library".
personally i equally enjoy lp's and cd's, as i stated earlier it is a personal thing, i have found sometimes a vinyl recording will sound better to me than a cd and vice-versa, though i have enjoyed reading everybody else's views, at the end of the day personal taste is a major factor here!
|
Prog Archives Tour Van
|
|
Neil
Forum Senior Member
Joined: October 04 2006
Location: United Kingdom
Status: Offline
Points: 1497
|
Posted: October 12 2006 at 05:20 |
oliverstoned wrote:
Heavyfreight wrote:
oliverstoned wrote:
Real hifi is way beyond everything in studio! |
How do you think that the audio gets from the instruments to your precious vinyl then?
Clue: it's done in a STUDIO! |
I was talking about your playback experience in studio... Through solidstate amp, using poor cables ("Monster cables" at best), etc... There are some good stuffs in studio as well (good monitor speakers, power filtering devices such as "The black box"). I own some (old)studio sources such as my tapedecks Naka1000 and Studer A710. For example, my digital setup (Sonic frontiers + Goldmund + Nordost cable) is beyond what they use for radio broadcast (Studer CD decks).
|
Set up a decent tube amplifier against a decent semiconductor one and do frequency and distortion tests and I know which one will win. Every tube amplifier has input and output transformers because they are high impedence devices that therefore require high voltages to get fast signal slew rates. These transformers behave as all transformers do and exhibit a falling efficiency as the frequency rises. This leads to a "warmer" sound because the hf gets rolled off. I don't disagree that the sound may be more pleasant to the ear but it isn't as accurate as a well built semiconductor amplifier.
It's the same with all this stuff about cables. I agree that powerful amps and speakers require decent cables (however I have seen audiophile tests where the audience failed to tell which was bell wire and which was audiophile cable). However gold plated contacts and the like are completely over the top. If it makes you feel good then fine. I admit that a lot of audiophile kit looks beautiful and is a work of art but it's no different to spending lots of money customising your car. Gold plated bumpers won't make it go any faster or handle better.
Edited by Heavyfreight - October 12 2006 at 05:21
|
When people get lost in thought it's often because it's unfamiliar territory.
|
|
MikeEnRegalia
Special Collaborator
Honorary Collaborator
Joined: April 22 2005
Location: Sweden
Status: Offline
Points: 21121
|
Posted: October 12 2006 at 05:31 |
^ agreed. gold plating makes much sense if corrosion is an issue (outdoor/salty air/humidity) or with ultra high frequencies (computer PCI-connectors). It doesn't change the sound in any way though.
|
|
|
oliverstoned
Special Collaborator
Honorary Collaborator
Joined: March 26 2004
Location: France
Status: Offline
Points: 6308
|
Posted: October 12 2006 at 05:35 |
"This leads to a "warmer" sound because the hf gets rolled off. I don't disagree that the sound may be more pleasant to the ear but it isn't as accurate as a well built semiconductor amplifier."
Distorsion is THEORICALLY higher on tube amps indeed, but actually distors far less than solidtate when listening. A solidstate is unable to reproduce a trumpet without harshness, the highs goes far better on tubes, like analog versus numeric. It's due to pair/unpair harmonics issues.
A good tube amp is not warm but neutral and far closer to the real music than a harsh transistor which breaks the ears in the highs.
However a GOOD solidstate is better in the LOW, that's why a bi-amp is the royal way.
About cable and connectic, it does a HUGE difference, precisly when you use tube and great sources which enables to hear these not-subtle differences.
Edited by oliverstoned - October 12 2006 at 05:37
|
|
oliverstoned
Special Collaborator
Honorary Collaborator
Joined: March 26 2004
Location: France
Status: Offline
Points: 6308
|
Posted: October 12 2006 at 05:36 |
Hifi has no limit and no comparison with your playback experience in studio!!!
Edited by oliverstoned - October 12 2006 at 05:36
|
|
MikeEnRegalia
Special Collaborator
Honorary Collaborator
Joined: April 22 2005
Location: Sweden
Status: Offline
Points: 21121
|
Posted: October 12 2006 at 05:39 |
^ sorry, but why do listening tests then show that the audiophiles cannot tell the cables apart? These tests are conducted with systems which the audiophiles approve of - you're always ignoring that fact!
|
|
|
oliverstoned
Special Collaborator
Honorary Collaborator
Joined: March 26 2004
Location: France
Status: Offline
Points: 6308
|
Posted: October 12 2006 at 05:43 |
These articles prove nothing. I can write what i want as well.
|
|
Neil
Forum Senior Member
Joined: October 04 2006
Location: United Kingdom
Status: Offline
Points: 1497
|
Posted: October 12 2006 at 05:48 |
Trumpets do sound harsh in real life. By using a tube amp you are effectively putting in a slight hf filter so the sound will be more pleasing to the ear. There is a danger with high quality digital recording that you do remove the natural filtering and hear everything.
At the end of the day it's all subjective. You like the sound that you like and you set up the sound system to produce that sound. Arguing that one is "better" than the other is pointless.
No one is arguing that if you spend lots of money on expensive kit you won't get a better sound than if you buy cheap kit. However for good sound quality and portability at a reasonable price you cannot beat the CD for frequency response and lack of distortion. That's why most people will buy a reasonable CD system and be quite happy with it.
|
When people get lost in thought it's often because it's unfamiliar territory.
|
|
oliverstoned
Special Collaborator
Honorary Collaborator
Joined: March 26 2004
Location: France
Status: Offline
Points: 6308
|
Posted: October 12 2006 at 05:54 |
Solid state and numeric adds an unnatural harshness to trumpet, violin or want you want. It hurts ear why music doesn't for real.
CD -along with any digital format such as DAT, SACD or worst, MP3- is very limited and distors far more than analog.
That's a not a matter of taste. Anyone would prefer a real good system. It's just a matter of having the opportunity to access to one.
People have stopped listening to music since the arrival of numeric and there's a reason
|
|
oliverstoned
Special Collaborator
Honorary Collaborator
Joined: March 26 2004
Location: France
Status: Offline
Points: 6308
|
Posted: October 12 2006 at 05:57 |
Now there are cheap musical integrated CD players (mainly english brands) such as Nad, Rotel, Rega, Naim, Creek, etc...but it's ridiculous versus a good vinyl deck in terms of PERFORMANCES (dynamic, details soundstage) as well as pleasure and emotion.
Like a good 70's Mc Intosh tuner (there are not good ones anymore these days unfortunatly)explodes very big CD setups.
Edited by oliverstoned - October 12 2006 at 05:58
|
|
Donate monthly and keep PA fast-loading and ad-free forever.