Keith Emerson Hammond Registrations?

Well folks I have the NI B4 virtual hammond, which is an amazing bit of software, capable of emulating pretty much every parameter in a B3/C3

And how much for the high drawbars?

There are already one or two presets in B4 called Keith's something or Emerson's something.

Shouldn't be fun tweaking the parameters and discovering the sound of your own rather than just loading a preset? Where's the innovation spirit?


I managed to get some quite convincing sounds with longer-rate percussion in higher (but not too high) register. Also, I'm always adding a bit of a overdrive, but not too much.

Drawbars are never cranked up to the maximum. Or at least not too many of them.  Basically, pulling only a root frequency + a certain amount of 5th will get a nice overdriven sound as in Five Bridges. But it's important to set the parameters of an overdrive/amp correctly. Tweedle around with it! You can't get a bad sound.

Which reminds me, Keith was literally raping his keyboards, but did he ever used Hammond's vibrato?


And not entirely off-topic : if anybody will explain to me (accurately and with precision) how to get the whistling synth sound (From The Beginning) on a (software) Moog Modular, that person will get my eternal gratitude.

As to original topic, back when I had functioning eyesight...

clarke2001 wrote: jammun wrote: ^^Shouldn't  you get the whistling with just a little tweak of the resonance?  Not saying that's it, but upping the resonance generally creates the whistling overtones.  Sorry, not accurately and with precision, so no gratitude expected or owed, but that's what I'd start playing with. Most likely not, because high resonance appears later in solo with an LFO assigned to it...this is probably two sine waves octave or two apart, plus something else...

Do we know if the solo was played on a Minimoog, or on the modular?  If the Mini, it should be fairly simple to figure out.  If the modular, good luck.

Hi there. As far as I'm aware, the FTB synth was played on a Minimoog. If you google "Minimoog patches" and click on "Images" you should be able to get the actual patch chart as endorsed by Keith himself.

Easy Money wrote: Start with the 3 low drawbars out full on, plus the deeper percussion setting (I forget the number) on full. See if you like that. If it needs to be a bit brighter try adding a bit of the 4th bar, or a bit of one of the high even number bars. Also try adding on the brighter percussion plus the low one and see if you like that. Also try starting with the three low bars on, but not all the way out, so the percussion is louder in comparism. I think Emerson's Hammond was modified for louder percussion. There is a certain metallic percussive sound to Emerson's Hammond that is hard to re-create. I'm sure he had his keyboard modified, they all do.